19-1824; Rev 1; 1/05 Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs General Description Features M The MAX4452/MAX4352 single, MAX4453/MAX4353 (cid:2) Ultra-Low 620µA Supply Current A dual, and MAX4454/MAX4354 quad amplifiers combine (cid:2) High Speed (MAX4452/MAX4453/MAX4454) X high-speed performance with ultra-low power con- 200MHz -3dB Bandwidth sumption. The MAX4452/MAX4453/MAX4454 are unity- 4 gain stable and achieve a -3dB bandwidth of 200MHz, 30MHz 0.1dB Gain Flatness 4 while the MAX4352/MAX4353/MAX4354 are compen- 95V/µs Slew Rate 5 sated for a minimum closed-loop gain of +5V/V and (cid:2) High Speed (MAX4352/MAX4353/MAX4354) 2 achieve a 80MHz -3dB bandwidth. These devices con- 80MHz -3dB Bandwidth sume only 620µA of supply current per amplifier. / 4MHz 0.1dB Gain Flatness M These amplifiers operate from a +2.7V to +5.25V single 240V/µs Slew Rate A supply and feature rail-to-railoutputs. Along with an excellent speed/power ratio of 323MHz/mA, these (cid:2) Single +3V/+5V Operation X devices feature a slew rate of 95V/µs and fast 20ns rise (cid:2) Rail-to-Rail Outputs 4 and fall times. These devices are ideal for low- (cid:2) Ultra-Small SC70-5, SOT23-5, SOT23-8 and Thin 4 power/low-voltage systems that require wide bandwidth such as cell phones and keyless entry systems. SOT23-8 Packages 5 3 The MAX4452/MAX4352 are available in miniature 5-pin Ordering Information SC70 and SOT23 packages, while the MAX4453/ / M MAX4353 are available in tiny 8-pin SOT23, Thin SOT23, TO P PAR T T EM P RA N GE PIN -P AC K AG E and SO packages. The MAX4454/MAX4354 are avail- M AR K A able in space-saving 14-pin TSSOP and SO packages. M AX 44 52 E XK -T - 40° C to +8 5° C 5 S C7 0- 5 ABI X ________________________Applications M AX 4452E UK -T - 40° C to +8 5° C 5 S OT23- 5 ADO V 4 Battery-Powered Instruments M AX 44 53 E KA-T - 40° C to +8 5° C 8 S OT23- 8 AAD S 4 M AX 4453E ZA -T - 40° C to +8 5° C 8 Thin SO T23-8 AAAB 5 Cellular Telephones M AX 4453E SA - 40° C to +8 5° C 8 S O — 4 Portable Communications M AX 44 54 E UD - 40° C to +8 5° C 14 TSS O P — / M Keyless Entry M AX 4454E SD - 40° C to +8 5° C 14 SO — Baseband Applications M AX 43 52 E XK -T - 40° C to +8 5° C 5 S C7 0- 5 ABJ A M AX 4352E UK -T - 40° C to +8 5° C 5 S OT23- 5 ADO W X Typical Operating Characteristic M AX 43 53 E KA-T - 40° C to +8 5° C 8 S OT23- 8 AAD T 4 M AX 4353E SA - 40° C to +8 5° C 8 S O — 3 SUPPLY CURRENT vs. M AX 43 54 E UD - 40° C to +8 5° C 14 TSS O P — 5 SUPPLY VOLTAGE (PER AMPLIFIER) 0.80 M AX 4354E SD - 40° C to +8 5° C 14 SO — 2 mA) 00..7705 MAX4452/3/4 toc01 Pin Configurations appear at end oSf deatlae scheteot.r Guide /MA NT ( 0.65 X RE CUR 0.60 NO. MIN GAIN SLEW 4 PLY 0.55 PART OF GAIN BANDWIDTH RATE 3 UP AMPS (MHz) (V/µs) S 0.50 5 MAX4452 1 1 200 95 0.45 3 MAX4352 1 5 400 240 0.40 /M 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 MAX4453 2 1 200 95 SUPPLY VOLTAGE (V) MAX4353 2 5 400 240 A MAX4454 4 1 200 95 X MAX4354 4 5 400 240 4 3 ________________________________________________________________Maxim Integrated Products 1 5 For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 4 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 ABSOLUTE MAXIMUM RATINGS 5 Supply Voltage (VCCto VEE)..................................................+6V 8-Pin Thin SOT23 (derate 6.3mW/°C 3 Differential Input Voltage ......................................................2.5V above +70°C)..............................................................500mW 4 IN_-, IN_+, OUT_..............................(VCC+ 0.3V) to (VEE- 0.3V) 8-Pin SO (derate 5.9mW/°C above +70°C).................471mW Current into Input Pins (IN_+, IN_-)..................................±20mA 14-Pin TSSOP (derate 6.3mW/°C above +70°C)........500mW X Output Short-Circuit Duration to VCC, VEE ................Continuous 14-Pin SO (derate 8mW/°C above +70°C)..................640mW A Continuous Power Dissipation (TA= +70°C) Operating Temperature Range...........................-40°C to +85°C 5-Pin SC70 (derate 3.1mW/°C above +70°C).............247mW Junction Temperature......................................................+150°C M 5 Pin SOT23 (derate 7.1mW/°C above +70°C)...........571mW Storage Temperature Range.............................-65°C to +150°C 8-Pin SOT23 (derate 8.9mW/°C above +70°C)...........741mW Lead Temperature (soldering, 10s).................................+300°C / 3 5 Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to 3 absolute maximum rating conditions for extended periods may affect device reliability. 4 X DC ELECTRICAL CHARACTERISTICS A (VCC= +5V, VCM= VCC/2 - 0.75V, VEE= 0, RL= ∞to VCC/2, VOUT= VCC/2, TA= TMINto TMAX, unless otherwise noted. Typical val- M ues are at TA = +25°C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS / 2 Operating Supply Voltage 5 Range VS Guaranteed by PSRR test 2.7 5.25 V 3 Quiescent Supply Current VCC = + 5V 620 1200 4 IS µA (Per Amplifier) VCC = +3V 530 X Input Common-Mode Voltage A Range VCM Guaranteed by CMRR test VEE - 0.1 VCC - 1.5 V M Input Offset Voltage VOS 0.4 12 mV / Input Offset Voltage 4 TCVOS 7 µV/°C Temperature Coefficient 5 Input Offset Voltage Matching MAX4453/MAX4454/MAX4353/MAX4354 ±1 mV 4 Input Bias Current IB 0.8 3 µA 4 Input Offset Current IOS 0.1 µA X Differential mode, A 120 kΩ -0.04V ≤ (VIN+ - VIN) ≤ +0.04V M Input Resistance RIN Common mode, 30 MΩ 3/ VEE - 0.1V ≤ VCM ≤ VCC - 1.5V 5 Common-Mode Rejection Ratio CMRR VEE - 0.1V ≤ VCM ≤ VCC - 1.5V 60 100 dB 4 +0.5V ≤ VOUT ≤ +4.5V, 4 Open-Loop Gain AVOL RL = 1kΩ 60 80 dB X RL = 20Ω connected to Sourcing 15 Output Current IOUT mA A VCC or VEE Sinking 22 M Output Voltage Swing VOUT RL = 1kΩ VCC - VOH 180 400 mV VOL - VEE 75 350 2/ Sourcing 17 Output Short-Circuit Current ISC mA 5 Sinking 24 4 VCC = +2.7V to +5.25V, VCM = 0, Power-Supply Rejection Ratio PSRR 60 70 dB 4 VOUT = 2V X A 2 _______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs AC ELECTRICAL CHARACTERISTICS M (VCC = +5V, VEE = 0, VCM = +1.75V, RL = 1kΩ to VCC/2, AVCL = +1V/V (MAX4452/MAX4453/MAX4454), AVCL = +5V/V A (MAX4352/MAX4353/MAX4354), TA= +25°C, unless otherwise noted.) X PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS 4 4 MAX4452/MAX4453/ 200 MAX4454 5 Small Signal -3dB Bandwidth BWSS VOUT = 100mVp-p MHz 2 MAX4352/MAX4353/ MAX4354 80 /M MAX4452/MAX4453/ 15 A MAX4454 Large Signal -3dB Bandwidth BWLS VOUT = 2Vp-p MHz X MAX4352/MAX4353/ 38 4 MAX4354 4 MAX4452/MAX4453/ 30 5 MAX4454 Bandwidth for 0.1dB Flatness BW0.1dB VOUT = 100mVp-p MHz 3 MAX4352/MAX4353/ 4 / MAX4354 M MAX4452/MAX4453/ 95 A MAX4454 Slew Rate SR VOUT = 2V step V/µs X MAX4352/MAX4353/ 240 4 MAX4354 4 MAX4452/MAX4453/ 20 5 Rise/Fall Time tR, tF V10O%UT t o= 920V% step MAX4454 ns 4 MAX4352/MAX4353/ 8 / MAX4354 M MAX4452/MAX4453/ A 40 MAX4454 X ts 1% VOUT = 2V step MAX4352/MAX4353/ 50 4 MAX4354 Settling Time ns 3 MAX4452/MAX4453/ 5 50 MAX4454 2 ts 0.1% VOUT = 2V step MAX4352/MAX4353/ / 60 M MAX4354 A X 4 3 5 3 / M A X 4 3 _______________________________________________________________________________________ 3 5 4

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 AC ELECTRICAL CHARACTERISTICS (continued) 5 (VCC = +5V, VEE = 0, VCM = +1.75V, RL = 1kΩ to VCC/2, AVCL = +1V/V (MAX4452/MAX4453/MAX4454), AVCL = +5V/V 3 (MAX4352/MAX4353/MAX4354), TA= +25°C, unless otherwise noted.) 4 PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS X MAX4452/MAX4453/ A VCC = 5V, MAX4454 -83 M VOUT = 2Vp-p, fC = 1MHz MAX4352/MAX4353/ -74 3/ Spurious-Free Dynamic MAX4354 SFDR dBc Range 5 MAX4452/MAX4453/ VCC = 3V, MAX4454 -79 3 VOUT = 2Vp-p, 4 fC = 1MHz MAX4352/MAX4353/ -70 X MAX4354 A MAX4452/MAX4453/ VCC = 5V, MAX4454 -83 M VOUT = 2Vp-p, / fC = 1MHz MAX4352/MAX4353/ -74 2 MAX4354 2nd-Harmonic Distortion dBc 5 MAX4452/MAX4453/ 3 VCC = 3V, MAX4454 -79 VOUT = 1Vp-p, 4 fC = 1MHz MAX4352/MAX4353/ -70 X MAX4354 A MAX4452/MAX4453/ M VCC = 5V, MAX4454 -87 VOUT = 2Vp-p, / fC = 1MHz MAX4352/MAX4353/ -74 4 MAX4354 3rd-Harmonic Distortion dBc 5 MAX4452/MAX4453/ 4 VCC = 3V, MAX4454 -80 4 VOUT = 1Vp-p, X fC = 1MHz MMAAXX44335542/MAX4353/ -72 A MAX4452/MAX4453/ M VCC = 5V, MAX4454 -82 VOUT = 2Vp-p, 3/ THD fC = 1MHz MMAAXX44335542/MAX4353/ -71 5 Total Harmonic Distortion dB MAX4452/MAX4453/ 4 VCC = 3V, MAX4454 -77 4 VOUT = 1Vp-p, X fC = 1MHz MAX4352/MAX4353/ -68 MAX4354 A M / 2 5 4 4 X A 4 _______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs AC ELECTRICAL CHARACTERISTICS (continued) M (VCC = +5V, VEE = 0, VCM = +1.75V, RL = 1kΩ to VCC/2, AVCL = +1V/V (MAX4452/MAX4453/MAX4454), AVCL = +5V/V A (MAX4352/MAX4353/MAX4354), TA= +25°C, unless otherwise noted.) X PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS 4 Two-Tone, Third-Order 4 Intermodulation Distortion f1 = 2MHz, f2 = 2.1MHz -65 dBc 5 Input Noise-Voltage Density en f = 10kHz 15 nV/√Hz 2 Input Noise-Current Density in f = 10kHz 0.5 pA/√Hz /M Input Capacitance CIN 2 pF A Output Impedance ZOUT f = 1MHz 0.8 Ω X Capacitive Load Drive 22 pF 4 MAX4453/MAX4454/MAX4353/MAX4354 Crosstalk XTALK VOUT = 100mVp-p, f = 1MHz -74 dB 4 5 Power-Up 1% Settling Time 1 100 µs (Note 2) 3 / Note 1: Units are 100% production tested at TA= +25°C. Specifications over temperature limits are guaranteed by design. M Note 2: Guaranteed by design. A X 4 4 5 Typical Operating Characteristics 4 (VCC= +5V, VEE= 0, VCM= +1.75V, AVCL= +1V/V (MAX4452/MAX4453/MAX4454), AVCL= +5V/V (MAX4352/MAX4353/MAX4354), /M RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.) A SUPPLY CURRENT vs. SUPPLY VOLTAGE (PER AMPLIFIER) SMALL-SIGNAL GAIN vs. FREQUENCY GAIN FLATNESS vs. FREQUENCY X UPPLY CURRENT (mA) 000000......577668505500 MAX4452/3/4 toc01 MALL-SIGNAL GAIN (dB) ----13321024 MMMMAAAAXXXX4444443355552424/ / MMAAXX44435533// MAX4452/3/4 toc02 GAIN FLATNESS (dB)--0000000.......12051324 MMMMAAAAXXXX4444443355552424/ / MMAAXX44435533// MAX4452/3/4 toc03 4352/MA S 0.50 S X -5 -0.3 0.45 -6 -0.4 4 0.40 -7 -0.5 3 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 100k 1M 10M 100M 1G 10k 100k 1M 10M 100M 1G 5 SUPPLY VOLTAGE (V) FREQUENCY (Hz) FREQUENCY (Hz) 3 / M A X 4 3 _______________________________________________________________________________________ 5 5 4

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 Typical Operating Characteristics (continued) 5 (VCC= +5V, VEE= 0, VCM= +1.75V, AVCL= +1V/V (MAX4452/MAX4453/MAX4454), AVCL= +5V/V (MAX4352/MAX4353/MAX4354), 3 RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.) 4 MAX4452/MAX4453/MAX4454 X LARGE-SIGNAL GAIN vs. FREQUENCY LARGE-SIGNAL GAIN vs. FREQUENCY GAIN AND PHASE vs. FREQUENCY MA B) 312 VOUT = 1Vp-MMMMpAAAAXXXX4444333355552424/ / MMAAXX44335533// MAX4452/3/4 toc04 B) 321 VOUT = 2Vp-p MMAAXX44335524/ MAX4353/ MAX4452/3/4 toc05 1068000 AVCL = +1000V/V MAX4452/3/4 toc06 11893005 4353/ ARGE-SIGNAL GAIN (d ----43201 MMMMAAAAXXXX4444444455552424/ / MMAAXX44445533// ARGE-SIGNAL GAIN (d ----43210 MMAAXX44445524/ MAX4453/ GAIN (dB) 42000 PHASE GAIN -44505 X L L -20 -90 -5 -5 A -6 -6 -40 -135 M -7 -7 -60 -180 100k 1M 10M 100M 1G 100k 1M 10M 100M 1G 10k 100k 1M 10M 100M 1G / FREQUENCY (Hz) FREQUENCY (Hz) FREQUENCY (Hz) 2 5 MAX4352/MAX4353/MAX4354 MAX4452/MAX4453/MAX4454 MAX4352/MAX4353/MAX4354 3 GAIN AND PHASE vs. FREQUENCY SMALL-SIGNAL PULSE RESPONSE SMALL-SIGNAL PULSE RESPONSE 4 100 MAX4452/3/4 toc07 180 MAX4452/3/4 toc08 MAX4452/3/4 toc09 X 80 AVCL = +1000V/V 135 INPUT INPUT 50mV/div 10mV/div A 60 90 GAIN M 40 45 B) d / N ( 20 0 4 AI G 5 0 PHASE -45 OUTPUT OUTPUT 4 -20 -90 50mV/div 50mV/div 4 -40 -135 X -60 -180 A 10k 100k 1M 10M 100M 1G 50ns/div 50ns/div FREQUENCY (Hz) M MAX4452/MAX4453/MAX4454 MAX4352/MAX4353/MAX4354 MAX4452/MAX4453/MAX4454 / 3 LARGE-SIGNAL PULSE RESPONSE LARGE-SIGNAL PULSE RESPONSE LARGE-SIGNAL PULSE RESPONSE MAX4452/3/4 toc10 MAX4452/3/4 toc11 MAX4452/3/4 toc12 5 4 INPUT 500mV/div INPUT INPUT 4 100mV/div 1V/div X A M OUTPUT OUTPUT OUTPUT 2/ 500mV/div 500mV/div 1V/div 5 4 4 50ns/div 50ns/div 50ns/div X A 6 _______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs Typical Operating Characteristics (continued) M (VCC= +5V, VEE= 0, VCM= +1.75V, AVCL= +1V/V (MAX4452/MAX4453/MAX4454), AVCL= +5V/V (MAX4352/MAX4353/MAX4354), A RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.) X MAX4352/MAX4353/MAX4354 MAX4452/MAX4453/MAX4454 MAX4352/MAX4353/MAX4354 4 LARGE-SIGNAL PULSE RESPONSE SMALL-SIGNAL PULSE RESPONSE SMALL-SIGNAL PULSE RESPONSE MAX4452/3/4 toc13 MAX4452/3/4 toc14 MAX4452/3/4 toc15 4 RL = 150Ω RL = 150Ω 5 INPUT INPUT 50mV/div INPUT 2 200mV/div 10mV/div / M A X OUTPUT OUTPUT OUTPUT 4 1V/div 50mV/div 50mV/div 4 5 50ns/div 50ns/div 50ns/div 3 / M MAX4452/MAX4453/MAX4454 MAX4352/MAX4353/MAX4354 CLOSED-LOOP OUTPUT A LARGE-SIGNAL PULSE RESPONSE LARGE-SIGNAL PULSE RESPONSE IMPEDANCE vs. FREQUENCY X MAX4452/3/4 toc16 MAX4452/3/4 toc17 500mINVP/dUiTv RL = 150Ω 100mINVP/dUiTv RL = 150Ω Ω)1010000 MAX4452/3/4 toc18 445 E ( NC 4 A D MPE 10 /M T I U OUTPUT OUTPUT TP A U 500mV/div 500mV/div O 1 X 4 0.1 3 50ns/div 50ns/div 100k 1M 10M 100M 1G 5 FREQUENCY (Hz) 2 OPEN-LOOP GAIN POWER-SUPPLY REJECTION CROSSTALK vs. FREQUENCY vs. LOAD RESISTANCE vs. FREQUENCY /M --12000 MAX4452/3/4 toc19 B)112000 MAX4452/3/4 toc20 --12000 MAX4452/3/4 toc21 AX dB) -30 N (d 80 -30 4 CROSSTALK ( ---456000 PEN-LOOP GAI 4600 PSR (dB) ---654000 353 O / -70 -70 M 20 -80 -80 A -90 0 -90 10k 100k 1M 10M 100M 1G 100 1k 10k 100k 100k 1M 10M 100M 1G X FREQUENCY (Hz) RLOAD (Ω) FREQUENCY (Hz) 4 3 _______________________________________________________________________________________ 7 5 4

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 Typical Operating Characteristics (continued) 5 (VCC= +5V, VEE= 0, VCM= +1.75V, AVCL= +1V/V (MAX4452/MAX4453/MAX4454), AVCL= +5V/V (MAX4352/MAX4353/MAX4354), 3 RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.) 4 COMMON-MODE REJECTION VOLTAGE NOISE DENSITY CURRENT NOISE DENSITY X vs. FREQUENCY vs. FREQUENCY vs. FREQUENCY 353/MA CMR (dB) -----4876500000 MAX4452/3/4 toc22 √NOISE (nV/)Hz1010000 MAX4452/3/4 toc23 √E DENSITY (pA/)Hz10100 MAX4452/3/4 toc24 4 -90 AGE NOIS 1 X -100 VOLT RRENT A U C M -110 10 0 100k 1M 10M 100M 1G 1 10 100 1k 10k 100k 1M 1 10 100 1k 10k 100k 1M / FREQUENCY (Hz) FREQUENCY (Hz) FREQUENCY (Hz) 2 5 MAX4452/MAX4453/MAX4454 MAX4352/MAX4353/MAX4354 MAX4452/MAX4453/MAX4454 3 DISTORTION vs. FREQUENCY DISTORTION vs. FREQUENCY DISTORTION vs. OUTPUT VOLTAGE MAX4 N (dBc) ----413200000 VOUT = 1Vp-p MAX4452/3/4 toc25 N (dBc) ----413200000 VOUT = 2V2pN-pD HARMONIC MAX4452/3/4 toc26 N (dBc) ---654000 f = 1MHz MAX4452/3/4 toc27 4/ STORTIO --6500 2ND HARMONIC STORTIO --5600 STORTIO -70 2ND HARMONIC 5 DI -70 DI -70 3RD HARMONIC DI -80 4 -80 3RD HARMONIC -80 3RD HARMONIC -90 4 -90 -90 X -100 -100 -100 100k 1M 10M 100M 100k 1M 10M 100M 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 A FREQUENCY (Hz) FREQUENCY (Hz) OUTPUT VOLTAGE (Vp-p) M MAX4352/MAX4353/MAX4354 MAX4452/MAX4453/MAX4454 MAX4352/MAX4353/MAX4354 / 3 DISTORTION vs. OUTPUT VOLTAGE DISTORTION vs. OUTPUT RESISTANCE DISTORTION vs. OUTPUT RESISTANCE 445 --5400 f = 1MHz MAX4452/3/4 toc28 --4500 VOUT = 1Vp-p, f = 1MHz MAX4452/3/4 toc29 --4500 VOUT = 2Vp-p, f = 1MHz MAX4452/3/4 toc30 MAX DISTORTION (dBc) ---867000 2ND HARMONIC DISTORTION (dBc) ---876000 2ND HARMONIC DISTORTION (dBc)---876000 3R2DN HDA HRAMROMNOICNIC / 3RD HARMONIC 2 -90 -90 -90 5 3RD HARMONIC 4 -100 -100 -100 4 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 1k 10k 100 1k 10k X OUTPUT VOLTAGE (Vp-p) RLOAD (Ω) RLOAD (Ω) A 8 _______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs Typical Operating Characteristics (continued) M (VCC= +5V, VEE= 0, VCM= +1.75V, AVCL= +1V/V (MAX4452/MAX4453/MAX4454), AVCL= +5V/V (MAX4352/MAX4353/MAX4354), A RL= 1kΩ to VCC/2, CL= 5pF, TA= +25°C, unless otherwise noted.) X ISOLATION RESISTANCE MAX4452/MAX4453/MAX4454 MAX4352/MAX4353/MAX4354 4 vs. CAPACITIVE LOAD POWER-UP TIME POWER-UP TIME 30 MAX4452/3/4 toc32 MAX4452/3/4 toc33 4 2286 MAX4452/3/4 toc31 VSUPPLY 5V VSUPPLY 5V 52 24 / 22 0 0 M Ω) (O 20 A RIS 18 1.5V X 1.5V 16 VOUT VOUT 4 14 4 12 0 0 5 10 0 50 100 150 500ns/div 500ns/div 3 CLOAD (pF) /M SUPPLY CURRENT vs. TEMPERATURE INPUT BIAS CURRENT INPUT OFFSET CURRENT A (PER AMPLIFIER) vs. TEMPERATURE vs. TEMPERATURE 1.0 200 0.10 X SUPPLY CURRENT (mA) 00000000........32456789 MAX4452/3/4 toc34 µINPUT BIAS CURRENT (A)-111-05550000000 MAX4452/3/4 toc35 µINPUT OFFSET CURRENT (A)---0000000.......000000002486624 MAX4452/3/4 toc36 4454/MA X -150 0.1 -0.08 4 0 -200 -0.10 -50 -25 0 25 50 75 100 -50 -35 -20 -5 10 25 40 55 70 85 -50 -35 -20 -5 10 25 40 55 70 85 3 TEMPERATURE (°C) TEMPERATURE (°C) TEMPERATURE (°C) 5 2 INPUT OFFSET VOLTAGE OUTPUT VOLTAGE SWING vs. TEMPERATURE vs. TEMPERATURE / M 2.0 250 OLTAGE (mV) 011...550 MAX4452/3/4 toc37 E SWING (mV) 125000 VOH MAX4452/3/4 toc38 AX43 T OFFSET V-0.05 UT VOLTAG 100 VOL 53 U P NP-1.0 UT / I O 50 M -1.5 A -2.0 0 -50 -35 -20 -5 10 25 40 55 70 85 -50 -35 -20 -5 10 25 40 55 70 85 X TEMPERATURE (°C) TEMPERATURE (°C) 4 3 _______________________________________________________________________________________ 9 5 4

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 Pin Description 5 PIN 3 4 NAME FUNCTION MAX4452 MAX4453 MAX4454 X MAX4352 MAX4353 MAX4354 A 1 — — OUT Amplifier Output M 2 4 11 VEE Negative Power Supply / 3 3 — — IN+ Noninverting Amplifier Input 5 4 — — IN- Inverting Amplifier Input 3 4 5 8 4 VCC Positive Power Supply X — 1 1 OUTA Amplifier A Output A — 2 2 INA- Amplifier A Inverting Input M — 3 3 INA+ Amplifier A Noninverting Input / 2 — 7 7 OUTB Amplifier B Output 5 — 6 6 INB- Amplifier B Inverting Input 3 — 5 5 INB+ Amplifier B Noninverting Input 4 X — — 8 OUTC Amplifier C Output A — — 9 INC- Amplifier C Inverting Input M — — 10 INC+ Amplifier C Noninverting Input / 4 — — 14 OUTD Amplifier D Output 5 — — 13 IND- Amplifier D Inverting Input 4 — — 12 IND+ Amplifier D Noninverting Input 4 X A M / 3 5 4 4 X A M / 2 5 4 4 X A 10 ______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs Detailed Description resistors, combined with 2pF of amplifier input capaci- M tance and 1pF of PC board capacitance, causes a pole The MAX4452/MAX4352 single, MAX4453/MAX4353 at 106MHz. Since this pole is within the amplifier band- A dual, and MAX4454/MAX4354 quad, single-supply, rail- width, it jeopardizes stability. Reducing the 1kΩ resis- X to-rail, voltage-feedback amplifiers achieve high slew tors to 100Ω extends the pole frequency to 1.06GHz, rates and wide bandwidths while consuming only 4 but could limit output swing by adding 200Ω in parallel 620µA per amplifier. Excellent speed/power ratio 4 with the amplifier’s load resistor. makes them ideal for portable devices and high-fre- 5 quency signal applications. Note: For high-gain applications where output offset voltage is a consideration, choose RS to be equal to 2 Internal feedback around the output stage ensures low the parallel combination of RF and RG (Figures 3a and / open-loop output impedance, reducing gain sensitivity M 3b). to load variations. This feedback also produces demand-driven current bias to the output transistors. 3b): A R = RF×RG X Rail-to-Rail Outputs, Ground-Sensing Input S RF +RG 4 The input common-mode range extends from (VEE - 0.1V) to (VCC - 1.5V) with excellent common-mode 4 rejection. Beyond this range, the amplifier output is a 5 nonlinear function of the input, but does not undergo 3 phase reversal or latchup. RG RF / M The output swings to within 180mV of either power-sup- ply rail with a 1kΩ load. The input ground-sensing and A the rail-to-rail output substantially increase the dynamic RISO X range. VOUT 4 Output Capacitive Loading and Stability VIN CL 4 The MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/ MAX4354 are optimized for AC performance. They are RBIN 5 not designed to drive highly reactive loads. Such loads 4 decrease phase margin and may produce excessive / M ringing and oscillation. The use of an isolation resistor eliminates this problem (Figure 1). Figure 2 is a graph Figure 1. Driving a Capacitive Load Through an Isolation A Resistor of the Optimal Isolation Resistor (RISO) vs. Capacitive X Load. 4 Applications Information ISOLATION RESISTANCE 3 vs. CAPACITIVE LOAD Choosing Resistor Values 5 30 Tpheen sMatAedX 4fo4r5 2u/nMityA Xg4a4in5. 3W/MhAenUX 4nc4iot5ny4f-iG gauarriene d iCn ftooenrr nfuiagnliultyyr acgtoaiominn-, 2286 MAX4452/3/4 toc39 2/M 24 a 24Ω feedback resistor (RF) is recommended. This A 22 resistor improves AC response by reducing the Q of Ω) the parallel LC circuit formed by the parasitic feedback R (ISO 20 X capacitance and inductance. 18 4 16 3 Inverting and Noninverting Configurations 14 5 Select the gain-setting feedback (RF) and input (RG) 12 3 resistor values that best fit the application. Large resis- tor values increase voltage noise and interact with the 10 / 0 50 100 150 M amplifier’s input and PC board capacitance. This can CLOAD (pF) generate undesirable poles and zeros and decrease A bandwidth or cause oscillations. For example, a nonin- Figure 2. Optimal Isolation Resistor vs. Capacitive Load X verting gain-of-two configuration (RF = RG) using 1kΩ 4 3 ______________________________________________________________________________________ 11 5 4

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 5 RG RF RG RF IN 3 4 X VOUT VOUT A RS M IN RO RO VOUT = [1+ (RF / RG)] VIN VOUT = (RF / RG) VIN / RS 3 5 3 Figure 3a. Noninverting Gain Configuration Figure 3b. Inverting Gain Configuration 4 X Active Filters Layout and Power-Supply Bypassing A The low distortion and high bandwidth of the These amplifiers operate from a single +2.7V to +5.25V M MAX4452/MAX4453/MAX4454 and MAX4352/ power supply. Bypass VCC to ground with a 0.1µF MAX4353/MAX4354 make them ideal for use in active capacitor as close to the pin as possible. 2/ filter circuits. Figure 4 is a 15MHz lowpass multiple Maxim recommends using microstrip and stripline tech- 5 feedback active filter using the MAX4452. niques to obtain full bandwidth. Design the PC board for a frequency greater than 1GHz to prevent amplifier 3 -R2 Gain = performance degradation due to board parasitics. 4 R1 Avoid large parasitic capacitance at inputs and out- X puts. Whether or not a constant-impedance board is A used, observe the following guidelines: 1 1 M ƒ0 = 2p R2× R3×C1×C2 • Do not use wirewrap boards due to their high induc- tance. / 4 • Do not use IC sockets because of the increased C2 5 Q= parasitic capacitance and inductance. C1×C2×R2×R3 4 1 1 1 4 + + R1 R2 R3 X A ADC Input Buffer M +5.0V Input buffer amplifiers can be a source of significant 3/ errors in high-speed ADC applications. The input buffer C2 is usually required to rapidly charge and discharge the R2 15pF 5 ADC’s input, which is often capacitive. See Output 150Ω 10kΩ 4 Capacitive Loading and Stability. In addition, since a 15R01Ω 51R13Ω 4 high-speed ADC’s input impedance often changes very VIN X rapidly during the conversion cycle, measurement C1 VOUT accuracy must be maintained using an amplifier with 100pF A very low output impedance at high frequencies. The M combination of high speed, fast slew rate, low noise, and a low and stable distortion over load makes the 10kΩ / 2 MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/ MAX4354 ideally suited for use as buffer amplifiers in 5 high-speed ADC applications. 4 4 Figure 4. Multiple-Feedback Lowpass Filter X A 12 ______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 • Use surface-mount instead of through-hole compo- ____________________Chip Information M 5 nents for better high-frequency performance. MAX4452/MAX4352 TRANSISTOR COUNT: 97 3 A • Use a PC board with at least two layers; it should be 4 as free from voids as possible. MAX4453/MAX4353 TRANSISTOR COUNT: 192 X X MAX4454/MAX4354 TRANSISTOR COUNT: 378 • Keep signal lines as short and as straight as possi- 4 A ble. Do not make 90°turns; round all corners. PROCESS: Bipolar 4 M 5 2 / Pin Configurations 3 / M 5 3 TOP VIEW A 4 X X 4 A OUT 1 5 VCC OUTA 1 8 VCC OUTA 1 14 OUTD 4 INA- 2 13 IND- M INA- 2 7 OUTB 5 / VEE 2 MMAAXX44435522 INA+ 3 MMAAXX44435533 6 INB- INA+ 3 12 IND+ 3 2 VCC 4 MAX4454 11 VEE / MAX4354 M 5 IN+ 3 4 IN- VEE 4 5 INB+ INB+ 5 10 INC+ 3 INB- 6 9 INC- A 4 SOT23/SC70 THIN SOT23/SOT23/SO OUTB 7 8 OUTC X X 4 A TSSOP/SO 4 M 5 4 / 4 / M 5 4 A 4 X X 4 A 3 M 5 2 / 3 / M 5 4 A 4 X X 4 A 3 M 5 3 / 2 / M 5 4 A 4 X X 4 A 3 ______________________________________________________________________________________ 13 M 5 4

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 Package Information 5 (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information 3 go to www.maxim-ic.com/packages.) 4 X S P E A 5L. 0, M C7 S / 3 5 3 4 X A M / 2 5 3 4 X A M / 4 5 4 4 X PACKAGE OUTLINE, 5L SC70 A 1 21-0076 C 1 M / 3 5 4 4 X A M / 2 5 4 4 X A 14 ______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs Package Information (continued) M (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information A go to www.maxim-ic.com/packages.) X 4 S P E 4 DIM MIINNCHEMSAX MMIILNLIMETEMRASX SOICN . 5 A 0.053 0.069 1.35 1.75 2 N A1 0.004 0.010 0.10 0.25 / B 0.014 0.019 0.35 0.49 M C 0.007 0.010 0.19 0.25 e 0.050 BSC 1.27 BSC A E 0.150 0.157 3.80 4.00 E H H 0.228 0.244 5.80 6.20 X L 0.016 0.050 0.40 1.27 4 4 VARIATIONS: 5 1 INCHES MILLIMETERS 3 TOP VIEW DIM MIN MAX MIN MAX N MS012 D 0.189 0.197 4.80 5.00 8 AA /M D 0.337 0.344 8.55 8.75 14 AB D 0.386 0.394 9.80 10.00 16 AC A D X 4 C A 4 e B A1 0 -8 5 L 4 FRONT VIEW SIDE VIEW / M A X PROPRIETARY INFORMATION TITLE: 4 PACKAGE OUTLINE, .150" SOIC 3 APPROVAL DOCUMENT CONTROL NO. REV. 1 21-0041 B 1 5 2 / M A X 4 3 5 3 / M A X 4 3 ______________________________________________________________________________________ 15 5 4

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 Package Information (continued) 5 (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information 3 go to www.maxim-ic.com/packages.) 4 X S P E A L . 5 3 M T-2 O S / 3 5 3 4 X A M / 2 5 3 4 X A M / 4 5 4 4 X PACKAGE OUTLINE, SOT-23, 5L A 1 21-0057 E 1 M / 3 5 4 4 X A M / 2 5 4 4 X A 16 ______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs Package Information (continued) M (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information A go to www.maxim-ic.com/packages.) X 4 S P E 4 b CL e SEE DETAIL "A" SYAAM1BOL 00M..09IN00 01M..14A55X OT23, 8L . 52 A2 0.90 1.30 S / b 0.28 0.45 M C 0.09 0.20 D 2.80 3.00 A CL E CL E1 E 2.60 3.00 E1 1.50 1.75 X L 0.30 0.60 L2 0.25 BSC. 4 PIN 1 e 0.65 BSC. I.D. DOT 4 (SEE NOTE 6) e1 1.95 REF. 0 0 8 5 e1 3 D C / M CL A L2 A A2 A1 GAUGE PLANE X SEATING PLANE C 4 4 0 L NOTE: 5 1. ALL DIMENSIONS ARE IN MILLIMETERS. 4 2 .H FEOEOLT O LFE TNHGET HLE MAEDA PSAURRAELDL EFLR OTOM SLEEAADTI NTIGP PTLOA UNPEP CE.R RADIUS OF DETAIL "A" /M 3. PACKAGE OUTLINE EXCLUSIVE OF MOLD FLASH & METAL BURR. 4. PACKAGE OUTLINE INCLUSIVE OF SOLDER PLATING. A 5. COPLANARITY 4 MILS. MAX. X 6. PIN 1 I.D. DOT IS 0.3 MM MIN. LOCATED ABOVE PIN 1. 7. SOLDER THICKNESS MEASURED AT FLAT SECTION OF LEAD TPITRLOE:PRIETARY INFORMATION 4 BETWEEN 0.08mm AND 0.15mm FROM LEAD TIP. PACKAGE OUTLINE, SOT-23, 8L BODY 8. MEETS JEDEC MO178. 3 APPROVAL DOCUMENT CONTROL NO. REV. 1 21-0078 D 1 5 2 / M A X 4 3 5 3 / M A X 4 3 ______________________________________________________________________________________ 17 5 4

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 4 Package Information (continued) 5 (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information 3 go to www.maxim-ic.com/packages.) 4 X S P E A m. m 0 M 4.4 P O S / S 3 T 5 3 4 X A M / 2 5 3 4 X A M / 4 5 4 4 X A M / 3 5 4 4 X A M / 2 5 4 4 X A 18 ______________________________________________________________________________________ M

Low-Cost, +3V/+5V, 620µA, 200MHz, M Single-Supply Op Amps with Rail-to-Rail Outputs A X 4 Package Information (continued) 4 (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information 5 go to www.maxim-ic.com/packages.) 2 / S M P E T. O A S N HI X T L 8 4 4 5 3 / M A X 4 4 5 4 / M A X 4 3 5 2 / M A X 4 3 5 3 / M A X 4 3 5 4 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 19 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 2005 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M axim Integrated: MAX4453EKA+T MAX4352EUK+T MAX4352EXK+T MAX4353EKA+T MAX4353ESA+ MAX4353ESA+T MAX4354ESD+ MAX4354ESD+T MAX4354EUD+ MAX4354EUD+T MAX4452EUK+T MAX4452EXK+T MAX4453ESA+ MAX4453ESA+T MAX4454ESD+ MAX4454ESD+T MAX4454EUD+ MAX4454EUD+T